Fan #1 DU85H - Exhaust Fan (2000cfm) - Job #7366207
No Solid Fuel - DU85H High Speed Direct Drive Centrifugal Upblast Exhaust Fan with speed control (speed control included for single phase only), disconnect switch and 15-3/4" wheel.
Exhaust Fan handles 2000 CFM @ -0.750" wc ESP, Fan runs at 1335 RPM.
Exhaust Motor: 0.750 HP, 3 Phs, 230 V, 60 Hz, 2.5 FLA, ODP (Open Drip Proof) x2
- VAV (Variable-Air-Volume) Wiring Package for Commercial Fans.
Manual Speed Control Variable Frequency Drive Includedx2
- ESV751N02YXB - Variable Frequency Drive - 1 HP Max., 200/240 V, Single or Three Phase Input, 4.2 A Max., NEMA 1 Enclosure
PART NEEDS PROGRAMMINGx2
- VFD factory mounted and wired in unit control vestibule.x2
- VFD & Reactor Mounting Bracket Used on DU 50 & 85x2
- HINGE KIT - Standard Hinge kit for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. Ships Loose. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized.x2
Fan #2 DU180H - Exhaust Fan (4000cfm) - Job #7366207 No Solid Fuel - DU180H High Speed Direct Drive Centrifugal Upblast Exhaust Fan with, disconnect switch and 18-3/4" wheel.
Exhaust Fan handles 4000 CFM @ -0.750" wc ESP, Fan runs at 1326 RPM.
Exhaust Motor: 2.000 HP, 3 Phs, 230 V, 60 Hz, 7.5 FLA, ODP, Premium (E-Plus3) Eff. x2
- VAV (Variable-Air-Volume) Wiring Package for Commercial Fans.
Manual Speed Control Variable Frequency Drive Includedx2
- ESV222N02YXB - Variable Frequency Drive - 3 HP Max., 200/240 V, Single or Three Phase Input, 9.6 A Max., NEMA 1 Enclosure
PART NEEDS PROGRAMMINGx2
- VFD factory mounted and wired in unit control vestibule.x2
- VFD Mounting bracket for DU/DR 180 and 200.x2
- Insulated Heat Baffle for Exhaust Fans. Type 475FRK 1 inch thick insulation installed on the top side of the top plate and under the motor of upblast and downblast fans. Cut to fit shaft wrapper and around vibration isolators and motor cooling hole. Caulked down to top plate.x2
- HINGE KIT - Standard Hinge kit for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. Ships Loose. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized.x2
Fan #3 DU180H - Exhaust Fan (3000cfm) - Job #7366207 No Solid Fuel - DU180H High Speed Direct Drive Centrifugal Upblast Exhaust Fan with, disconnect switch and 18-3/4" wheel.
Exhaust Fan handles 3000 CFM @ -0.750" wc ESP, Fan runs at 1097 RPM.
Exhaust Motor: 1.500 HP, 3 Phs, 230 V, 60 Hz, 6.0 FLA, ODP, Premium (E-Plus3) Eff. x1
- VAV (Variable-Air-Volume) Wiring Package for Commercial Fans.
Manual Speed Control Variable Frequency Drive Includedx1
- ESV112N02YXB - Variable Frequency Drive - 1-1/2 HP Max., 200/240 V, Single or Three Phase Input, 6.0 A Max., NEMA 1 Enclosure
PART NEEDS PROGRAMMINGx1
- VFD factory mounted and wired in unit control vestibule.x1
- VFD Mounting bracket for DU/DR 180 and 200.x1
- Insulated Heat Baffle for Exhaust Fans. Type 475FRK 1 inch thick insulation installed on the top side of the top plate and under the motor of upblast and downblast fans. Cut to fit shaft wrapper and around vibration isolators and motor cooling hole. Caulked down to top plate.x1
- HINGE KIT - Standard Hinge kit for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. Ships Loose. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized.x1
Curb - Job #7366207
Exhaust Adapter EXHADP-OUT-PL-25.50 OD X 26.50 OD X 9H Flat Curb x3
Curb - Job #7366207
Exhaust Adapter EXHADP-25.50TO23.00SQX9H Flat Curb x2