DU85H High Speed Direct Drive Centrifugal Upblast Exhaust Fan with speed control (speed control included for single phase only), disconnect switch and 15-3/4" wheel.
Exhaust Fan handles 2800 CFM @ -0.000" wc ESP, Fan runs at 1357 RPM.
Exhaust Motor: 1.000 HP, 1 Phs, 115 V, 60 Hz, 11.6 FLA, TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor) 
x1 - ECM Wiring Package and Manual or 0-10VDC Control for Exhaust EC motors. RTC Controller (No harness when ordered as a part).
x1       - Wall Mount Construction for Direct Drive Fan. Through-Bolt mount motor for extra support in wall mount application. Vibration isolator mounts not used.
x1- Through Wall Curb Mount Installation Option.
x1- Disconnect Switch Loose - Wire Is Extended 10' To Allow Remote Mounting Of The NEMA 3R Enclosure & Switch. Cord Fittings Are Installed In Switch Box. 10-32 Hardware and 7/8" Plug Are Installed In Apron Switch Mounting Holes.
x1- HINGE KIT - Heavy Duty Hinge kit with locking spring pin for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. 10 GA Galvanized.
Note: Requires 16GA curb or 18GA curb with 16GA back plate - (9"x9" cut size).
x1- Curb CRB23X20E On Fan #1 Flat Curb
x1- Vented Base for Curb